A Complete Guide to treat blood blisters

blood blisters

Blood blisters are caused by skin trauma, such as severe bruising. The result is a red, fluid-filled bump that can be very painful to the touch. While most blood blisters are harmless and will eventually go away on their own, it’s important to know how to treat them to reduce symptoms and prevent infection. There are a number of steps you can take yourself at home to ensure the blister heals completely.

Treatment immediately after the occurrence

Depressurize the blood blister.

Begin by depressurizing the bladder and letting fresh air in. You want to make sure nothing is rubbing against or squeezing the blister. Exposing them to fresh air allows the natural healing process to begin. If it’s not under pressure, it stays intact and has a much lower chance of tearing or bursting and becoming infected.

If the wound is very painful right after the accident, put an ice pack on it.

Ice compresses can be placed on the affected area for 10 to 30 minutes. This can reduce pain and cool the blister if it’s hot and throbbing. You can also put ice on the blister regularly afterward, not just right after the injury. Don’t put the ice directly on the skin, otherwise, it can cause a cold burn. Instead, place a towel between the ice and the skin to protect the injured area. To reduce pain and swelling, gently apply aloe vera gel to the blister.

Under normal circumstances, you should see the blood blister

never It may be tempting, but piercing the blister can cause an infection and delay your body’s natural healing process. If the blood blister is on the foot, try not to put too much pressure on it.

Let them heal on their own

Expose the bubble to air.

Most blisters will heal on their own over time, but keep the area clean and dry to speed up the healing process. Exposing them to the air also supports the healing process and also reduces the risk of infection.

Reduce friction and pressure.

If you have a blister in an area that gets a lot of friction, such as your heel or a toe, take precautions to minimize friction on the blister. It will otherwise run the risk of tearing or breaking open if it is subjected to a lot of friction, such as frequently rubbing against another surface, such as a shoe. Using a band-aid is the easiest way to protect the blister. You can buy certain donut-shaped band-aids that reduce friction but still leave the blister exposed so it can heal faster.

Protect them with a bandage.

Blisters on hands or feet that are exposed to constant friction can also be protected with a loose bandage. Bandages relieve pressure on the bladder and reduce friction, the two things that are key to helping the bladder heal faster and reducing the chance of infection. Use a sterile bandage and change it regularly. Before applying the bandage, clean the blister and surrounding area.

Continue treating the blood blister until the area has completely healed.

If the blister is abnormally large, make an appointment to see a doctor. Such blisters sometimes need to be drained (emptied), preferably under medical supervision, to prevent infection.

Recognize when and how to empty a blood blister

Decide if it’s best to pop the bubble.

Although blood blisters will heal on their own and should be left alone in most cases, there are sometimes cases where drainage is the best solution. For example, when a lot of blood accumulates in her and she hurts a lot. Or if it gets so big that it could burst open on its own. Think carefully about whether you really need to pop the bladder, and when in doubt, err on the side of caution. This is especially important with blood blisters, which require more careful treatment than normal blisters. If you do decide to open them, you must do so carefully and methodically to minimize the risk of infection. Because of the risk of infection, you should never open a blood blister if you have HIV, heart disease, or cancer.

Prepare to puncture the blood blister.

If you decide to open the blood blister, you need to make sure it doesn’t get infected. Before you begin, wash your hands and the blister area thoroughly with soap and water. Sterilize a needle with rubbing alcohol. You will use this needle for opening the bladder (don’t use a pin – they are less sharp than a needle and sometimes have barbs on the end).

Prick the blister and let it drain.

Carefully and gently puncture the blister’s casing with your needle. The liquid will start to drain out of the hole. You can apply gentle pressure to help the process.

Clean and bandage the leaked blood blister.

Now put an antiseptic (assuming you don’t have any allergies) such as BetadineĀ® on the blister. Clean the area around the blister and bandage it with a sterile bandage. After you’ve done that, you should try to put as little pressure or friction on the bladder as possible. To prevent potential infection, you should monitor the blister closely and change the dressing regularly. You can find the latest verified promo codes and discounts for medication products discounts, click here.

Treat a burst or ruptured blood blister

Let them run out carefully.

If the blood blisters ruptures or bursts due to pressure or friction, you must act quickly to prevent infection. Begin by gently emptying the bladder.

Clean them and apply an antiseptic.

Thorough cleaning of the area should be followed by the application of an antiseptic ointment (allergy-friendly) just as if you had opened the blister yourself. Do not use alcohol or iodine directly on the blister as these substances can slow down the healing process.

Keep the skin intact.

After you’ve drained the liquid, make sure to keep the excess skin intact by gently stroking it back over the exposed area. This provides additional protection for the bladder and facilitates the healing process. Don’t tear the skin at the edges of the blister.

Bandage the blister with a clean bandage.

Applying a clean bandage to the blister is very important in preventing infection. The bandage should be tight enough to prevent further injury to blood vessels, but not so tight that it restricts blood flow to the area. Change the bandage daily after cleaning the area. You should give your blood blister a week to fully heal.

Watch for signs of infection

Watch carefully for signs of infection while treating your blood blister.

If the infection becomes serious, a doctor can prescribe oral antibiotics to treat it. It is very important that you bandage the blister well and clean the area carefully to prevent infection. If you feel generally unwell, perhaps with a fever or high temperature, this can be an indication of an infection.

Look for increased pain, swelling, or redness around the blister.

Signs of infection include redness and swelling of the area or pain that can start and last long after the blister appears. Pay close attention to these signs and take appropriate countermeasures.

Look for red streaks emanating from the bubble.

If you notice red streaks emanating from the blister, it may be a sign of a serious infection that has spread to the lymphatic system. Lymphangitis often occurs when the virus or bacteria from an infected wound has spread to the lymphatic system. Other symptoms of lymphangitis include swollen lymph nodes (glands), chills, fever, loss of appetite, and general malaise. If you have these symptoms, contact a doctor immediately.

Check for pus and fluid leaking from the blister.

Pus is another indicator of a potentially infected blood blister. Notice if yellowish or greenish pus or an opaque fluid collects in or leaks from the blister.


Content Team

Content Team is a team of creative bloggers and marketers that conceptualize, create, and publish the most effective money-saving tips and the ultimate shopping guides.